Specification:

1. Bluetooth Version: V5.3

2. Supported Bluetooth Codec: AAC,SBC

3. Active Noise-Cancellation: No

4. Control method: Touch

5. Charging interface: Type-C

6. Battery Capacity: 38mAh*2+400mAh

7. Charge Time: Earphone: 1.5H; Earphone charging case: 2H

8. Recharging time of full earphone case : 4.5times

9. Total Play Time: about 6.5H for one full charging (volume at 60%)

10. Charging Input: 5V/1A

11. Water resistance: IPX4

12. Earbud Dimension(L*W*H): ：21*24*33mm

13. Charging Case Dimension(L*W*H): 57*30*50.2mm

Initial Setup

1. Open the charging case lid and remove the two earbuds. Peel off the insulation film from both earbuds. Place the earbuds back into the charging case, then take them out again. At this point, the left and right earbuds will automatically enter the TWS interconnection state. Once the interconnection is successful, both earbuds will enter pairing mode.

2. Active the Bluetooth non your device, the select "SOUNDPEAST Clear-Pods" from the Bluetooth device list to complete the pairing process.

How to reset SoundPEATS Clear-Pods?

With the earbuds inside the charging case and press and hold the charging case button for 10 seconds until the charging case indicator light flashes white and red twice. The reset process is complete.

About BLUETOOTH

What can I do if the earbuds stopped connecting to my device?

1. Clear the pairing record between the earbuds and all of the previous devices.

2. Try to clear some Bluetooth listings on your device and restart the device.

3. Put the earbuds into the charging case to reset.

1. Activate Bluetooth on the device, and choose "SOUNDPEATS Clear-Pods" on Bluetooth list to pair.

Why is the signal intermittent when I am outdoors?

In the outdoors, the Bluetooth signal will be interfered, such as subways, high-speed rails, trains, dense traffic lights, car engines and so on. And if the phone is in your pocket, and the engine ear is diagonal to the phone, it will affect the Bluetooth signal. As human body is the biggest source of signal blocking. So when the left earbud is the engine earbud, please put your phone in the left pocket, which will be better.

About CHARGING

How to charge the charging case?

1. Connect the charging case to a Type-C charger. (The current doesn't exceed 1A)

2. If the earbuds stay idle for an extended period, charge them at least every three months to prevent the battery from being damaged.

What should I do if the charging case won’t charge?

Please try to use another known working charging cable to charge the charging case for more than 10 hours through your computer.

Compared to other electronics, the headphones are low power products. Hence for charging safety, please do not use fast charger.